Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 25 / 76

66550062-EN - V6.0 - 31/10/21
- 25 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
Windows
setup static IP address
DESCRIPTION
In order to setup the Videx IP system the PC running the VIDEX IP wizard and all the VIDEX IP devices must be connected on the same
LAN. Once the physical connection is made, the PC’s network card must be properly set and connected to the LAN mentioned above. To
achieve this please follow the instructions below.
WINDOWS SETUP STATIC IP ADDRESS
The picture refer to the Windows 10 operating sys-
tem but you can proceed in a similar way under
Windows 7.
Open the control panel by right clicking on the
start menu or searching it from the search box.
Fig. 1 Open control panel
Under control panel items, click on “Network and
Sharing Centre”.
Fig. 2
Select “Network and Sharing Centre”
Under “Network and Sharing Centre” click on
“Change adapter settings” on the left side of the
window.
Fig. 3
Select “Change adapter settings”