Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 24 / 76

66550062-EN - V6.0 - 31/10/21
- 24 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
Art. 6296
3.5" touch screen videophone for IPure system
WALL MOUNTING INSTRUCTIONS
1
2
A
A
Fig. 1 Fig. 2
B
B
Fig. 3
135cm
Fig. 4 Fig. 5 Fig. 6
Fig. 7
2
1
Fig. 8
WARNING: Remember to remove the mains before installing the videomonitor.
1. Disconnect the handset, then remove the cover inserting a 5.5mm flat screwdriver into both the clips
A
then rotate clockwise until
you listen a “CLICK!” (Fig. 1) .
2. Pull outwards the top part of the cover. Don’t pull the cover straight (Fig. 2) .
3. Open one of the two pre-formed holes
B
of your choice according to your needs (Fig. 3) .
4. Put the cover in a vertical position on the wall leaving approx 135cm between the lower side of the back cover and the fin-
ished floor (Fig. 4).
5. Mark the point for the fixing holes remembering that the wires must be fed through the hole that you chose to open (Fig. 5) .
6. Make the holes, insert the wall plugs and fix the back cover with the screws feeding the wires into the hole that you chose to
open (Fig. 6) .
7. Connect the wires to the terminals following the provided installation diagram and the Ethernet cable to LAN connector (Fig. 7) .
8. Close the unit: first hook on the bottom then the push in the top until you hear a “CLICK!” and reconnect the handset (Fig. 8) .