Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 49 / 76

66550062-EN - V6.0 - 31/10/21
- 49 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
The “ SERVICES ” tab ( Fig. 49 ) is used to configure the list of services available to that videophone:
• Use the “Select a Device” list box to select a device, either a VIDEX door panels or ethernet relay (not available yet).
• Use the “Select an output” list box to select an output/relay for the selected device.
• Click on the “ + ” button to add the selected output to the outputs list. Repeat the steps for each output to add. To remove an out-
put from the list click on the “delete” button.
The outputs stored in this list can be activated from the videophone by pressing the button on the touch screen.
The “
ADVANCED
” tab (
Fig. 50
) can be used to set the admin password for password used to protect certain settings (audio & video
quality adjustmens), for network connection quality “
KEEP ALIVE SETTINGS
” and allows the operator to unlink the device from VI-
DEX CLOUD. and unlink the device from VIDEX CLOUD. If for any reason you need to remove the device from the system, the unlink
is required otherwise the device remains linked to the same installation. If the device is not linked to VIDEX CLOUD, the “Unlink...”
button is disabled and a red background warning advises that the device is not linked to VIDEX CLOUD.
After completing all settings, click on the button “
Apply All Changes
” to transfer the configuration to the videophone and await the
notice “
device correctly updated
”.
Repeat the same steps for all other videophones connected on the system.
Fig. 49 Video Intercom - Services List Fig. 50 Video Intercom - Advanced Settings Tab
VX IP Wizard
Wizard configuration software for VIDEX IP System