Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 26 / 76

66550062-EN - V6.0 - 31/10/21
- 26 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
Windows
setup static IP address
Under “Network connection”, right click on the
network card used for the LAN connection to the
VIDEX IP System then click on “Properties”
Fig. 4 Edit network card properties
Under “Ethernet Properties” slide down to find
“Internet Protocol Version 4 (TCP/IPv4)”, click on it
then click on the “Properties” button.
Fig. 5 Select “Internet Protocol Version 4 (TCP/IPv4)”
Under “Internet Protocol Version 4 (TCP/IPv4)
Properties” click on the radio button “Use the fol-
lowing IP address” then set the
IP Address “172.20.0.1”,
Subnet mask “255.255.0.0”
and leave the other fields empty as shown in the
picture.
Click the “OK” button then close “Ethernet Properties”.
Now the PC’s network card is properly configured
to run the VIDEX IP wizard software.
Fig. 6
Set IP address and subnet mask