Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 16 / 76

66550062-EN - V6.0 - 31/10/21
- 16 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
Art. 6296
3.5" touchscreen videophone for IPure system
Fig. 1
Front
Fig. 2
Inside
27 mm 144 mm
182 mm
F
D
C
E
A
B
GNDI IN2 IN1
OUT2 OUT2 OUT1 OUT1
12V GND A B GND
E
D
H
I
G
DESCRIPTION
3.5” TFT high-resolution LCD monitor, OSD, capacitive touch
screen, 4 buttons configurable for functions: door open, inter-
com call, auto start, camera switching, timed privacy service.
12Vdc or PoE power supply.
2 inputs / 2 outputs.
Wall mounted, white or black finish.
LEGEND
A Touchscreen display
B
Tactile programmable
buttons and LED’s
C
Missed call LED
D Call tone volume control
E
Brightness control
F Handset
G Connection terminals
H
Ethernet connector
I Microphone volume trimmer
To download the programming software
VX IP Wizard and obtain the latest firmware
and manuals please visit the following web-
site and register
https://service.videx.it/
VIDEOPHONE INITIALISATION
If powering on the videophone (through a POE switch/router or
an external power supply unit) the display shows the message
“DEVICE NOT INITIALISED”, use the configuration software for
the VIDEX IP system (Videx IP Wizard.exe) to setup the device
and the system.
CONTROLS
Call tone volume control
3 level switch (it controls also the local bell volume).
Display brightness control
Sliding wheel.
Microphone volume trimmer
I
It increases the volume from the handset to the door
panel loudspeaker.
LEDS
Privacy on LED
It illuminates when the privacy service is enabled.
Service LED
It flashes showly if the gateway is not found.
If turned on, the device has failed to register with the
configured SIP server.
Missed call LED C
It flashes showly if there is a missed call.