Videx IP videokit IPVK/6296 Series, Руководство по установке

Страница: 5 / 76

66550062-EN - V6.0 - 31/10/21
- 5 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
D
C
E
A
B B
Fig. 1
Front
STEEL
ALI
HIGH BRASS
MATTE
4533-0
4533-1
4533-2
Made in Italy
RELAY 1 RELAY 2 INPUTS
EXT CAMERA
POWER ETHERNET
EXPANSION
BUTTONS
RS485
C1 NO1 NC1 NO2 NC2 C2 IN1 GNDI IN2 GND +12V RX+ RX– TX+ TX–
GND
B A
V
JP1
GND
SL
Close
Open
PROG.
4533X-0
4533X-1
4533X-2
EIA/TIA-568A
or EIA/TIA-568B
See CONNECTION table
O
F G
I
N
M
L
H
Fig. 2
Back
DESCRIPTION
Speaker unit module for IP systemwith built-in wide colour camera
with autoiris lens and white light illumination LEDs. Depending on
the speaker unit version it includes zero, one or two call push buttons.
Art. 4533X versions are also equiped with a built-in proximity
key reader and programming modes.
The unit circuitry incorporates:
• The transmitting amplifier with microphone and volume control;
• The receiving amplifier with volume control;
• Two enslavement relay to enable electric lock and an additional ser-
vice (3 contacts each: common, normally open and normally closed).
• The call buttons from 0 to a maximum of 2 depending on the
module version;
• The illumination LEDs for the card name holder;
• The camera comprised of illumination LEDs.
To download the programming software
VX IP Wizard
and obtain the latest firmware
and manuals please visit the following web-
site and register
https://service.videx.it/
LEGEND
A
Camera with illumination LEDs
B
Operation LEDs
C
Loudspeaker
D
Card name holder with built in-in proximity key reader
(only Art. 4533X versions)
E
Call push button (0, 1 or 2 depending on the model)
F
Loudspeaker volume
G
Microphone volume control
H
RS485 connection terminals
I
Boot loader push button for firmware update
L
RS485 termination jumper
M
External camera connection terminals
N
Button expansion modules connector
O
System connection terminals
AVAILABLE VERSIONS
Art. 4533-0 Art. 4533X-0 Art. 4533-1
Art. 4533X-1
Art. 4533-2
Art. 4533X-2
LEDS
Flashes when the called indoor station is busy.
The LED will be off when the system is in stand-by.
If illuminated, indicates that the call from the outdoor sta-
tion is in progress. The LED will switch OFF when the call
is answered or expired the call time without any answer.
If illuminated, indicates that it is possible to speak because
the call has been answered. The LED will switch OFF at the
end of a conversation (or at the end of the conversation time).
If illuminated, indicates that the door lock has been op-
erated. It will switch OFF at the end of the programmed
“door opening” time.
CONTROLS
Microphone volume
Adjust the microphone volume.
Rotate clockwise to increase or anti-clockwise to decrease
Loudspeaker volume
Adjust the loudspeaker volume.
Rotate clockwise to decrease or anti-clockwise to increase
Rev.0.1
Art. 4533X
Speaker unit with built-in camera & proximity key readeri
Art. 4533
Speaker unit with built-in camera