Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 84 / 255

Network Video Recorder User Manual
5.3 Configuring Motion Detection Recording and Capture
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a
motion detection event takes place, the NVR can analyze it and do many actions to handle
it. Enabling motion detection function can trigger certain channels to start recording, or
trigger full screen monitoring, audio warning, notify the surveillance center and so on. In
this chapter, you can follow the steps to schedule a record which triggered by the detected
motion.
Step 1 Enter the Motion Detection interface.
Menu>Camera>Motion
Figure 5-12 Motion Detection
Step 2 Configure Motion Detection:
1)
Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection .
3) Drag and draw the area for motion detection by mouse. If you want to set the
motion detection for all the area shot by the camera, click Full Screen . To
clear the motion detection area, click Clear .
4) Click Settings , and the message box for channel information pops up.