Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 251 / 255

Network Video Recorder User Manual

No monitor connected with the NVR locally and when you manage the IP camera
to connect with the device by web browser remotely, of which the status
displays as Connected. And then you connect the device with the monitor via
VGA or HDMI interface and reboot the device, there is black screen with the
mouse cursor.
Connect the NVR with the monitor before startup via VGA or HDMI interface, and
manage the IP camera to connect with the device locally or remotely, the status of
IP camera displays as Connect. And then connect the device with the CVBS, and
there is black screen either.
Possible Reasons:
After connecting the IP camera to the NVR, the image is output via the main spot
interface by default.
Step 22 Enable the output channel.
Step 23 Select “Menu > Configuration > Live View > View”, and select video output
interface in the drop-down list and configure the window you want to view.

The view settings can only be configured by the local operation of NVR.

Different camera orders and window-division modes can be set for different output
interfaces separately, and digits like
“D1”and “D2” stands for the channel number,
and “X” means the selected window has no image output.
Step 24 Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further process.

Live view stuck when video output
locally. Possible Reasons:
−
Poor network between NVR and IP camera, and there exists packet loss
during the transmission.
−
The frame rate has not reached the real-time frame rate.
Step 25 Verify the network between NVR and IP camera is connected.

When image is stuck, connect the RS-232 ports on PC and the rear panel of NVR
with the RS-232 cable.

Open the Super Terminal, and execute the command of
“
ping 192.168.0.0
–l 1472
–f ” (the IP address may change according to the real condition), and check if
there exists packet loss.