Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 253 / 255

Network Video Recorder User Manual
Simultaneously press Ctrl , Alt and Delete to enter the windows task management
interface, as shown in the following figure.
Figure 18-1 Windows task management interface
 Select the “Performance” tab; check the status of the CPU and Memory.

If the resource is not enough, please end some unnecessary processes. Step 31
Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further process.

When using the NVR to get the live view audio, there is no sound or there is too
much noise, or the volume is too low.
Possible Reasons:
−
Cable between the pickup and IP camera is not connected well; impedance
mismatches or incompatible.
− The stream type is not set as
“Video & Audio”.
−
The encoding standard is not supported with NVR.
Step 32 Verify the cable between the pickup and IP camera is connected well; impedance
matches and compatible.
Log in the IP camera directly, and turn the audio on, check if the sound is normal. If
not, please contact the manufacturer of the IP camera.
Step 33 Verify the setting parameters are correct.
Select “Menu > Record > Parameters > Record”, and set the Stream Type as “Audio
& Video”.
Step 34 Verify the audio encoding standard of the IP camera is supported by the NVR.