Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 187 / 255

Network Video Recorder User Manual
Figure 12-14 SNMP Settings Interface
Step 5 When you choose the Yes option in step4, configure the following SNMP settings:
Trap Address: IP Address of SNMP host.
Trap Port: Port of SNMP host.
Step 6 Click the Apply button to save and exit the interface.
Before setting the SNMP, please download the SNMP software and manage to receive
the device information via SNMP port. By setting the Trap Address, the NVR is allowed
to send the alarm event and exception message to the surveillance center.
12.2.5 Configuring More Settings
Step 1 Enter the Network Settings interface.
Menu >
Configuration
> Network
Step 2 Select the More Settings tab to enter the More Settings interface.
Figure 12-15 More Settings Interface
Step 3 Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.

Alarm Host IP/Port : With a remote alarm host configured, the device will send
the alarm event or exception message to the host when an alarm is triggered.
The remote alarm host must have the CMS (Client Management System)
software installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS
(Client Management System) software (e.g., VMS-VEZPRO) is installed, and the
Alarm Host Port must be the same as the alarm monitoring port configured in the
software (default port is 7200).

Multicast IP : The multicast can be configured to realize live view for more than
the maximum number of cameras through network. A multicast address spans
the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use
the IP address ranging from 239.252.0.0 to 239.255.255.255.