Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 194 / 255

Network Video Recorder User Manual
Figure 12-
25 UPnP™ Settings Finished-Manual

Manual Mapping
If your router does not support the UPnP
TM
function, perform the following steps to map the
port manually in an easy way.
Before you start:
Make sure the router support the configuration of internal port and external port in the
interface of Forwarding.
Steps:
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the NAT tab to enter the port mapping interface.
Step 3 Leave the Enable UPnP checkbox unchecked.
Step 4 Click to activate the External Port Settings dialog box. Configure the external
port No. for server port, http port, RTSP port and https port respectively.
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the
value of the other ports should be between 1 and 65535 and the value must be different
from each other. If multiple devices are configured for the UPnP™ settings under the
same router, the value of the port No. for each device should be unique.
Figure 12-26 External Port Settings Dialog Box
Step 5 Click OK to save the setting for the current port and return to the upper-level menu.