Vezco VZ-NVR-161080-P, Быстрый старт

Страница: 236 / 255

Network Video Recorder User Manual
Step 3 Enter the information for new user, including User Name , Admin Password,
Password , Confirm , Level and
User’s MAC Address
.
Password : Set the password for the user account.
Strong Password recommended
–We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.

Level: Set the user level to Operator or Guest. Different user levels have different
operating permission.
Operator: The Operator user level has permission of Two-way Audio in Remote
Configuration and all operating permission in Camera Configuration by default.
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration
and only has the local/remote playback in the Camera Configuration by default.

User’s MAC Address:
The MAC address of the remote PC which logs onto the
NVR. If it is configured and enabled, it only allows the remote user with this
MAC address to access the NVR.
Step 4 Click the OK button to save the settings and go back to the User Management
interface. The added new user will be displayed on the list, as shown in Figure 16-8.
Figure 16-8 Added User Listed in User Management Interface
Step 5 Select the user from the list and then click button to enter the Permission
settings interface, as shown in Figure 16-9.