233
-
Before replacing the bracket into the wheel
axle, place the O-ring as shown in the figure, in
order to keep it properly positioned after the
bracket assembly.
-
Refit the washer and the snap ring.
-
Replace the screws fixing the shock absorber to
the bracket and tighten at the prescribed
torque.
Tightening torque:
Shock absorber lower fixing screw
14-19 lbs·ft
(
20-27 N·m
)
11.7
Front Brake Caliper-Shock Absorber Bracket Overhaul
-
The caliper-shock absorber fixing bracket is
provided with two roller bearings spaced from
one another as shown in the figure.
-
Remove the two roller bearings from the
bracket using the specific tool form the shock
absorber coupling side, as shown in the figure.
Specific tools and equipment:
Handle
020376Y
1.0
×
1.1 in (
26
×
28 mm
) adapter
020441Y
0.866 in (
22 mm
) guide
020365Y
Содержание GT 200
Страница 1: ......
Страница 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Страница 151: ...151 10 10 Lubrication Circuit ...
Страница 195: ...195 Remove the main jet Loosen the emulsion jet Tilt the carburetor and remove the emulsion jet ...