VESPA GT 200, Руководство по ремонту

Страница: 132 / 287

132
Note: Always replace the nut with a new one upon
any reassembly.
- Turn the engine by hand to obtain a minimum
tension of the belt.
Tightening torque:
Driving pulley screw: 55.3-61.2 lbs · ft
( 75-83 N·m )
Specific equipment and tools:
Lock wrench: 020368Y
-
The torque limiter is calibrated at 71.7 lbs · ft
( 100 N·m ).
-
The lock wrench works on the starting rim.
-
If the torque limiter is worn, it is possible to
detect the fault when locking of the nut on the
driving shaft.
-
The torque limiter cannot be overhauled.
-
In case of anomalies, replace the start-up rim
with the limiter.
10.7.25 Fitting the Clutch Drum
- Fit the clutch drum and the spacer.