VESPA GT 200, Руководство по ремонту

Страница: 62 / 287

62
7.7 Topping-Up the Engine Cooling Liquid
Note: The liquid level inspection should be
carried out every 3,726 mi. ( 6,000 km ) when
the engine is cold. The following steps should
be followed:
-
Rest the vehicle on its central stand level
ground.
-
Loosen the screw shown in the figure and
remove the plastic flap on the right hand
side of the vehicle’s leg-shield, in order to
access the cooling liquid expansion tank
-
Remove the expansion tank cap and top
up, if the coolant level is below or near the
MIN level in the expansion tank. The fluid
level should always be between the MIN
and MAX marks.
-
The coolant consists of a 50% mixture of
demineralized
water and antifreeze
solution with a base of ethylene glycol and
corrosion inhibitors.
Warning – To prevent leaks of the cooling
fluid from the expansion tank during the use
of the vehicle, never exceed the MAX mark
upon filling.