57
Note:
Every 3,726 miles (
6,000 km
), during
servicing, it is necessary to remove the stops
and the rubber caps located below the filter
box, as shown in the figure, and drain any oil
accumulation.
Cleaning (Every 7,452 miles, or
12,000 km
):
-
Wash with water and shampoo.
-
Dry with light jets of compressed air and wipe with a clean cloth.
-
Soak with a 50% fuel-oil mixture (use SELENIA AIR FILTER OIL).
-
Let the filtering element drip and squeeze it with hands without wringing.
-
Replace the filtering element.
Caution
– If the vehicle is mostly used on dusty roads, the air filter must be cleaned more
frequently than what indicated in the scheduled maintenance table.
Caution
– Never let the engine run without air filter. This would cause an excessive wear of
cylinder and piston and would damage the carburetor.
Содержание GT 200
Страница 1: ......
Страница 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Страница 151: ...151 10 10 Lubrication Circuit ...
Страница 195: ...195 Remove the main jet Loosen the emulsion jet Tilt the carburetor and remove the emulsion jet ...