247
11.16 Silent-Block Overhaul
-
Check that there are no dents on the joint
connecting the swing arm on the engine side to
the swing arm on the frame side.
-
Check the axial clearance between the two
swing arms using a thickness gauge.
Standard clearance:
0.016-0.024 in
(
0.40-0.60 mm
)
Max. allowable clearance:
0.059 in
(
1.50 mm
)
-
To check the clearance on the frame -side arm,
prepare the assembly using the frame-side bolt
and the two spacers from tool no. 020229Y.
Alternatively, use two standard washers for
Ø 0.472 in (
12 mm
) bolts and minimum
external diameter and thickness of Ø 1.181 in
(
30 mm
) and 0.157 in (
4 mm
).
-
Check that the rotation is smooth.
-
Check the axial of the swing arm on the frame-
side.
Standard clearance:
0.016-0.024 in
(
0.40-0.60 mm
)
Max. allowable clearance:
0.059 in
(
1.50 mm
)
Содержание GT 200
Страница 1: ......
Страница 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Страница 151: ...151 10 10 Lubrication Circuit ...
Страница 195: ...195 Remove the main jet Loosen the emulsion jet Tilt the carburetor and remove the emulsion jet ...
