169
-
Choose the base gasket thickness according to
the difference between the two dial gauge
readings obtained, referring to the table below.
Choosing the correct base gasket thickness will
give the correct compression ratio.
-
Remove the dial gauge and support from the
cylinder.
Warning
– Using a mallet to fit the circlip can
damage the circlip grooves.
With fiber gasket
(thickness 0.0433 in (
1.1 mm
))
Measured recess
Gasket thickness
0.0197-0.0236 in (
0.5-0.6 mm
)
0.0157±0.0020 in (
0.4±0.05 mm
)
0.0236-0.0315 in (
0.6-0.8 mm
)
0.0236±0.0020 in (
0.6±0.05 mm
)
0.0315-0.0354 in (
0.8-0.9 mm
)
0.0315±0.0020 in (
0.8±0.05 mm
)
With metal gasket
(thickness 0.0118 in (
0.3 mm
))
Measured recess
Gasket thickness
- 0.0118 - -0.0078 in (-
0.3 -
-
0.2 mm
)
0.0157±0.0020 in (
0.4±0.05 mm
)
- 0.0078 - 0.000 in (-
0.2 - 0.0 mm
)
0.0236±0.0020 in (
0.6±0.05 mm
)
0.0000 - +0.0039 in (
0.0 - +0.1 mm
)
0.0315±0.0020 in (
0.8±0.05 mm
)
Содержание GT 200
Страница 1: ......
Страница 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Страница 151: ...151 10 10 Lubrication Circuit ...
Страница 195: ...195 Remove the main jet Loosen the emulsion jet Tilt the carburetor and remove the emulsion jet ...
