Vertiv NetSure 710 Series, Руководство по установке

Страница: 25 / 142

Vertiv
| NetSure 710 Series Installation Manual (IM581127000) | Rev. U 25
Installing Optional Battery Busbar Extension Kit, Part No. 562364
This kit provides plates that extend the system busbars above the top of a List 23 and List 24 distribution
cabinet and increases the number of lug landings available for battery cables. This kit provides back-to-back
landings for up to ten lugs for the hot side and eight lugs for the return side.
Installing Part No. 562364 Busbar Extension Kit
This kit consists of the following:
Qty. Part No. Description
1 562362 Return Side Extension Busbar
1 562363 Power Side Extension Busbar
1 562354 Cover Kit
16 214204100 3/8" Flat Washer
16 214825000 3/8" Belleville Washer
16 227646800 3/8-16 x 1-1/4" Bolt
Perform the following steps to install the battery busbar extension plates.
Procedure
Refer to Figure 8 as the procedure is performed.
1. Open the distribution cabinet front door.
2. Install busbar extension plates as shown in Figure 8 . Apply anti-oxidizing compound to busbar mating
surfaces before assembling. Tighten bolts to the recommended torque value shown in
Figure 8
.
NOTE!
Install the Belleville lock washers so the concave side is towards the busbar.
3. Close the distribution cabinet access door.
Perform the following steps to mount the Lexan cover.
Procedure
Refer to Figure 9 as the procedure is performed.
1. Loosen the four (4) screws at the back of the busbars.
2. Place the Lexan cover at the back of the busbars and use the four (4) screws to secure it.
3. Remove the four (4) screws at the top of the cabinet and place the cover.
4. Re-use the screws to secure the top cover.