Vertiv NetSure 710 Series, Руководство по установке

Страница: 12 / 142

Vertiv
| NetSure 710 Series Installation Manual (IM581127000) | Rev. U 12
NOTE!
The system is not powered up until the end of this checklist.
NOTE!
Some of these procedures may have been performed at the factory for you.
Installing the System
 Relay Rack Secured to Floor
 System Components Mounted in Relay Rack (if required)
 Optional Lug Adapter Busbar Kits Installed
 Circuit Breakers Installed
 Fuses Installed
Setting Jumper and Switch Options
 Jumpers on System Interface Circuit Card Set
 Factory Switch Setting on IB2 Interface Board Verified
 Factory Switch Setting on Optional EIB Interface Board Verified
 Factory Switch Setting on Optional SM-DU+ Verified
Making Electrical Connections
 Relay Rack Grounding Connection (Frame Ground) Made
 Central Office Ground Connection Made
 AC Input and AC Input Equipment Grounding Connections Made
 External Alarm, Reference, Monitoring, and Control Connections Made
 Ethernet Connection Made (if required)
 Load Connections Made
 Battery Connections Made
a) Batteries Installed and Connected in an optional Battery Tray (if furnished)
b) Optional Battery Tray Front Battery Covers Installed (if furnished)
c) Optional Battery Tray Circuit Breaker Guards Installed (if furnished)
Installing the Modules and Initially Starting the System
 Rectifier and Converter Modules Installed
 System Started, Configured, and Checked