Vertiv NetSure 710 Series, Руководство по установке

Страница: 21 / 142

Vertiv
| NetSure 710 Series Installation Manual (IM581127000) | Rev. U 21
Installing a 581127000 List 93 Battery Tray
Perform the following procedures to install a 581127000 List 93 Battery Tray.
DANGER!
The relay rack must be securely anchored to the floor before a battery tray is installed.
Installing a Battery Tray
Procedure
1. To install a 581127000 List 93 Battery Tray, perform the procedure in Figure 4 .
Figure 4:
Installing a 581127000 List 93 Battery Tray
Battery Tray
Rear
Angle
Bracket
Rear Angle Bracket
Cabling
Bracket
Front Rear
1. Slide battery tray into relay rack and
secure to relay rack with 12-24 x 3/4"
thread forming hex head screws and
#10/12 ground washers (1 place per
side) or #12 flat washers (3 places per
side). (Torque to 70 in-lbs).
2. Secure rear angle brackets (both sides)
to battery tray with 1/4-20 x 3/4” bolts,
1/4” flat washers, 1/4” lock washers, and
1/4” nuts. (Torque to 84 in-lbs).
3. Secure rear angle brackets (both sides)
to relay rack with 12-24 x 3/4" thread
forming hex head screws and #10/12
ground washers (1 place per bracket)
or #12 flat washers (1 place per bracket).
(Torque to 70 in-lbs).
4. Secure cabling brackets (both sides) to
relay rack with 12-24 x 1/2" thread forming
hex head screws. (Torque to 70 in-lbs).