![background image](http://html1.mh-extra.com/html/vem/vemodrive-vsi-2-0-hd/vemodrive-vsi-2-0-hd_instruction-manual_3985886146.webp)
144
CG Drives & Automation, 01-5326-01r3b
Min Alarm Response delay [4192]
When the load level without interruption is below the alarm
level longer than set “Min Alarm delay” time, an alarm is
activated.
Communication information
Autoset Alarm [41A]
The Autoset Alarm function can measure the nominal load
that is used as reference for the alarm levels. If the selected
“Load Type [415]” is Basic it copies the load the motor is
running with to the menu “Normal Load [41B]”. The
motor must run on the speed that generates the load that
needs to be recorded. If the selected “Load Type [415]” is
Load Curve it
performs a test-run and populates the “Load
Curve [41C]” with the found load values.
Communication information
The default set levels for the (pre)alarms are:
These default set levels can be manually changed in menus
[416] to [419]. After execution the message “Autoset OK!” is
displayed for 1s and the selection reverts to “No”.
Normal Load [41B]
Set the level of the normal load. The alarm or pre alarm will
be activated when the load is above/under normal load ±
margin.
Communication information
Load Curve [41C]
The load curve function can be used with any smooth load
curve. The curve can be populated with a test-run or the
values can be entered or changed manually.
Load Curve 1-9 [41C1]-[41C9]
The measured load curve is based on 9 stored samples. The
curve starts at minimum speed and ends at maximum speed,
the range in between is divided into 8 equal steps. The
measured values of each sample are displayed in [41C1] to
[41C9] and can be adapted manually. The value of the 1st
sampled value on the load curve is displayed.
Default:
0.1 s
Range:
0-90 s
Modbus Instance no/DeviceNet no:
43333
Profibus slot/index
169/237
EtherCAT index (hex)
4d05
Profinet IO index
19717
Fieldbus format
Long, 1=0.1 s
Modbus format
EInt
WARNING!
When autoset does a test run the motor and
application/machine will ramp up to
maximum speed.
NOTE: The motor must be running for the Autoset Alarm
function to succeed. A not running motor generates a
“Failed!” message.
Default:
No
No
0
Yes
1
Modbus Instance no/DeviceNet no:
43334
Profibus slot/index
169/238
EtherCAT index (hex)
4d06
Profinet IO index
19718
Fieldbus format
UInt
Modbus format
UInt
4192 MinAlarmDel
Stp
0.1s
41A AutoSet Alrm
Stp
No
Overload
Max Alarm
menu [4161] + [41B]
Max Pre Alarm menu [4171] + [41B]
Underload
Min Pre Alarm menu [41B] - [4181]
Min Alarm
menu [41B] - [4191]
Default:
100%
Range:
0-400% of max torque
NOTE: 100% Torque means: I
NOM
= I
MOT
. The maximum
depends on the motor current and AC drive max current
settings, but the absolute maximum adjustment is
400%.
Modbus Instance no/DeviceNet no:
43335
Profibus slot/index
169/239
EtherCAT index (hex)
4d07
Profinet IO index
19719
Fieldbus format
Long, 1=1%
Modbus format
EInt
Default:
100%
Range:
0–400% of max torque
41B Normal Load
Stp
100%
41C1 Load Curve1
Stp
0rpm 100%
9(0R'ULYH 96, 9(0 U
Содержание VEMoDRIVE VSI 2.0 HD
