Veeder-Root TLS-450PLUS, Руководство оператора, Страница: 39 / 69

Initial Setup Of The Console Using Workflow Wizard Setup>Tank>Siphon Sets
35
Setup>Tank>Siphon Sets
This screen lets you define siphon m anifolded sets, which are two or m ore tanks connected
by a m anifold. Typically, with a 2” dia m eter m anifold pipe and with the proper vacuu m on the
line, a syste m can keep product flowing fro m one tank to another.
An exa m ple siphon set diagra m is shown below:
This setup allows roughly the sa m e a m ount of product in both tanks. This application is typi-
cally used in large truck stops or high throughput tanks for unleaded fuel.
Available Tanks
Lists enabled and disabled tanks in your syste m .
Siphon Set
Tanks that m ake up the selected siphon set (if one is selected), separated by a se m i-colon.
Viewing a Siphon Set
Select a siphon set fro m the icon list on the botto m of the screen. The tanks that m ake up
that siphon set are displayed in the Siphon Set colu m n.
Creating a Siphon Set
Once a siphon set is created, the m anifolded set icon
appears in tank displays like the Overview>Tank Overview
screen.
NOTE:
The m axi m u m nu m ber of siphon sets that can be con-
figured is the m axi m u m nu m ber of tanks divided by 2,
rounded down.
1. Select the siphon set icon (botto
m left of screen) and then
select a new siphon set nu m ber fro m the siphon set list that
displays along the botto m of the screen.
2. In the Available Tanks colu m n, select the first tank you
want as part of this new siphon set and press . This
m oves the tank to the Siphon Set colu m n.
3. Repeat Step 2 for the next tank you need to add to your
siphon set. Continue to do this until all of the tanks you need
are
m oved into the Siphon Set colu m n. If you need to m ove a
tank out of the Siphon Set colu m n, select next to that
tank. That tank returns into the Available Tanks colu m n.
4. Touch to save your settings.
Deleting a Siphon Set
1. Select a siphon set (fro m botto m left of screen). The tanks
that m ake up that siphon set are displayed in the Siphon Set
colu m n.
2. Select next to each tank. This m oves the tank out of the
Siphon Set colu m n and back into the Available Tanks colu m n.
3. Once you have m oved out all tanks, touch to save
your settings.
Reporting When Using Siphon Sets
When using siphon m anifold sets, the console will print m ul-
tiple reports (one for each tank in the siphon set). To avoid
m ultiple reports, configure the print task using an event-
based trigger that references the first tank listed in the
siphon set. See Actions>Help>Understanding Auto
m atic
Events for infor m ation about event-based triggers.
When you configure a print task using this m ethod, the Last
Delivery Report includes a su mm ation for all tanks in the
siphon set.
Secondary Tank Pri m ary Tank
STP
Dispenser