Unipulse F805AT-CK, Руководство по эксплуатации

Страница: 71 / 129

8.STATISTICS
・
ACCUMULATION CONTROL FUNCTION
60
8-2. Accumulation Command Acceptance
Select to receive the accumulation command regularly (REGULARLY) or to receive it only when the
indicated value is stable (IN STABLE MODE).
Operation
8-3. Accumulation Clear
Clear Accumulated Data (times, accumulation value and statistical data) for the selected Code.
Operation
8-4. Total Comparison/ Total Limit/ Count Limit
It can compare with Accumulation value or Count limit of each code.
Moreover, it can select external output ON or OFF of the result of comparison.
Setting for each code is also possible.
1) TOTAL COMP MODE It is the selection whether compares with Accumulation value or not.
Select from COMP. OFF, Total COMP. ON, Total COMP. OFF, Count
COMP. ON, or Count COMP. OFF.
The Total comparison is conducted then changes to on
the comparison screen and message screen when Total limit output is ON.
COMP OFF Comparison is not conducted. Pin49 becomes "RUN" signal.
TOTAL COMP ON When Accumulation value
≧
Total limit setting value, it is considered
as "Total limit".
External output is conducted. Pin49 becomes "Total limit" signal.
TOTAL COMP OFF When Accumulation value
≧
Total limit setting value, it is considered
as "Total limit".
External output is not conducted. Pin49 becomes "RUN" signal.
COUNT COMP ON When Accumulation counts
≧
Count limit setting value, it is
considered as "Total limit".
External output is conducted. Pin49 becomes "Total limit" signal.
COUNT COMP OFF When Accumulation counts
≧
Count limit setting value, is considered
as "Total limit".
External output is not conducted. Pin49 becomes "RUN" signal.
MODE EXTENDED FUNC.
→ →
Press
ACCUMULATION COMMAND ACCEPTANCE
→
Select REGULARLY/ IN STABLE MODE OK
→
MODE EACH CODE (Code No.)
→ →
Press ACCUM. CLEAR
→ →
Select NO/ YES OK
→
RUN ACCUM.