Unipulse F805AT-CK, Руководство по эксплуатации

Страница: 54 / 129

6.FUNCTION SETTING
43
6-2-4. Weighing code selection/ Setting code selection
The F805AT-CK has two types of codes: codes to perform weighing (weighing codes) and codes to
make settings (setting codes).
The selection of Weighing Code and Setting Code should be performed by External Part (Control
Connector) or Internal part (Front Panel Key).
Selection with Internal or External part can also be decided from external selection (SELECTION).
1) Weighing code selection
2) Setting code selection
1: KEY SPECIFY Specify a code No. by using the touch panel.
KEY INPUT (It can be changed through serial communications, such as RS-232C.)
2: EXTERNAL INPUT Specify a code No. by external (control connector) input.
3: SELECTION Either key input or external input can be set by the condition of
external (control connector) input.
Operation
Setting code "05"
Weighing code "10"
While weighing with the Setting Value of Code "10",
the Setting Value of Code "05" can be changed.
INTERNAL
0 9
EXTERNAL
EXTERNAL SELECTION
CONTROL
MODE FUNCTION
→ →
Press WEIGHING CODE SELECTION
→
Select KEY SPECIFY/ EXTERNAL INPUT/ SELECTION OK
→
1)
MODE FUNCTION
→ →
Press SETTING CODE SELECTION
→
Select KEY INPUT/ EXTERNAL INPUT/ SELECTION OK
→
2)