Unipulse F805AT-CK, Руководство по эксплуатации

Страница: 13 / 129

1.FEATURES OF F805AT-CK
2
Basically, set “EMPTY COUNT” at 0, and “TAKE IN COUNT” at the maximum value (999).
According to the measuring object weight, set an optimum value to “
NEAR ZERO ”.
For “SAMPLE MODE”, select the largest possible value at which the load becomes constant.
(Refer to Fig. 2.)
Take-in interval
Near zero
0
t
NET
◇
Good example
Take-in interval
0
t
NET
With the SAMPLE MODE adjusted, the
position where the weight is flat is
acquired.
(The average of the data of this part is
taken. 50% applies in the figure.)
With the SAMPLE MODE set at 100%,
fluctuating data is acquired.
Since the near zero is inappropriate,
the near zero may be applied in a
position different from the proper one.
[Figure 2]
◇
Bad example
Near zero