Unipulse F805AT-CK, Руководство по эксплуатации

Страница: 18 / 129

2.APPEARANCE DESCRIPTION
7
Main display
Weight value Displays GROSS, NET, ERROR, or RESULT.
When Error occurred, the display shows Error and Weight value alternately.
1/4 scale division Displays the condition of 1/4 scale division.
It is displayed only when the weight display is GROSS or NET.
Unit Displays the unit already set in unit setting.
Status display
EMP Lights during empty counting in weighing.
SMP Lights during counting in weighing.
LOCK Indicates the conditions of the lock switch and soft lock as:
Highlights in red when the lock switch is ON, and
Highlights in orange when the soft lock is ON.
Priority is given to the lock switch.
NZ Lights when the weight is the NEAR ZERO set value or less.
ZALM Lights when a zero alarm is given.
OK Displays the judgment state of RESULT as follows:
Over: HI (blue), Go: OK (light orange), Under: LO (red).
COMPL During Complete signal is ON, COMPL highlights in sky blue.
STAB STAB highlights in green during weight value is stable.
RUN When the TOTAL LIMIT is ON, TOTAL highlights in red.
Also, during access to NOV RAM after changing set values, etc., NOV is
displayed.
During normal operation in cases other than those above, the display highlights in
sky blue.
Set values display
FINAL Set the FINAL value.
Change the FINAL value by pressing the button.
Depending on the setting, the following modes are available: mode in which the
screen is switched to the numerical input screen; mode in which the current value
is taken in as the FINAL value; and mode in which the latest RESULT is taken in
as the FINAL value.
CODE Displays the currently weighing code number.
The screen is switched to the CODE setting screen by pressing the button.
OVER Displays the calculation result of FINAL S OVER SETTING.
The screen is switched to the OVER setting screen by pressing the button.