Unipulse F805AT-CK, Руководство по эксплуатации

Страница: 34 / 129

4.WAY OF CONNECTION
23
4-4. SI/F 2-wire Serial Interface
This 2-wire serial interface is for connecting F805AT-CK to peripheral equipment such as printers or
remote displays. No polarity is needed for this simple, low-cost installation.
The transmitting distance is about 300m (328yds).
The Lock, SI/F. terminal on the rear panel is a Cage Clamp.
Connection is simple and easy.
1) Strip the casing 6mm (0.2 inch) on the cable to
be connected.
2) Twist the bare wire to fit the terminal hole.
3) Insert the supplied screwdriver into the upper hole
and lift upward.
4) Insert the twisted wires into the lower hole.
5) Pull the screwdriver out from the upper hole.
6) Make sure cable is clamped securely and does not come
out with a slight tug.
4-5. SI/FII High Speed Bi-directional 2- Wire Serial Interface
SI/FII is a high speed bi-directional serial interface for connecting F805AT-CK to various peripheral
Devices. These include printers, remote displays, converters (D/A, BCD-IN, BCD-OUT, RS-232C).
Up to 20 devices may be connected by 2-core parallel or shielded cable with polarity.
5 ~ 6mm
Notice
- Cable can be from 24 to 14AWG (0.2 to 2.5mm
2
).
- Do not solder the cable wires or fix a solderless terminal.
- If several cables to be inserted to the same hole, twist those cable wires together
and insert.
+
SIF
Ⅱ
+
－
－
+
+
－
－
SIF
Ⅱ