Ulvac UTM300B, Инструкция по эксплуатации

Страница: 93 / 113

A-8
Appendix A COMMUNICATIONS
*12
aa : Settings number (decimal). Refer to Table A-7 "Table of Settings".
bbbb : Set value (decimal). Refer to Table A-7 "Table of Settings".
*13 xxx...xxx : Any 20-character displayable character string.
*14 aa : Settings number (decimal). Refer to Table A-8 "List of RS-485 Settings".
*15 aa : Settings number (decimal). Refer to Table A-8 "List of RS-485 Settings".
bbbb : Set value (decimal). Refer to Table A-8 "List of RS-485 Settings".
*16 RS-485 Setting.
RS-485 command settings are enabled.
*17 Factory settings.
Function Default Setting Refference
Variable rotation speed setting Rotational speed = NORMAL Table A-7 No.03
Low rotation speed Low speed = 100.0% Table A-7 No.04 or No.08
Warning output setting WARNING DISPLAY = ON Table A-7 No.10
RY1 (relay output 1) setting Delay Venting Table A-7 No.80
RY2 (relay output 2) setting DI2 Table A-7 No.81
DO1 setting NORMAL signal Table A-7 No.82
DO2 setting ALARM signal Table A-7 No.83
Analog output setting Rotational speed Table A-7 No.84
Acceleration over time setting 480 [s] Table A-7 No.85
Power limit setting 100 [%] Table A-7 No.89
Normal speed setting 80 [%] Table A-7 No.90
Venting valve operation time
setting 10 [s] Table A-7 No.93
*18 RS-485 Factory Settings.
Function
初期設定 備考
Network ID NetWork ID = 01 Table A-8 No.01
Multidrop Setting Multidrop = OFF Table A-8 No.02
Terminator ON/OFF Terminator = ON Table A-8 No.03