Ulvac HELIOT 301, Инструкция по эксплуатации

Страница: 86 / 96

- 76 -
(5) Operable input format
DIP switch No. 1 OFF Operation item
In normal state
(remote OFF)
In remote
operation
DIP switch No. 1 ON
Only remote operation
SYSTEM START START/STOP, test switch
input
Same as right
→
Signal input
SYSTEM STOP START/STOP switch
input
Same as right
→
Signal input
TEST START
TEST switch input
Same as right
→
Signal input
TEST STOP
VENT switch input
Same as right
→
Signal input
AUTO ZERO
Auto zero switch
input
Same as right
→
Signal input, auto zero
switch input
CALIBRATION
Enter with after
selecting mode switch
.
Same as right
→
Signal input, enter with
after selecting mode
switch .
PRINT OUT
Return switch input
Same as right
→
Signal input, enter with
return switch .
Parameter setting
Enter with return switch after selecting mode switch .
Message clear
Enter with the return switch .
SETPOINT L Outputted regardless of local operation or remote operation.
SETPOINT H Outputted regardless of local operation or remote operation.
START UP OK Outputted regardless of local operation or remote operation.
SYSTEM ERROR Outputted regardless of local operation or remote operation.
-0 Outputted regardless of local operation or remote operation.