UDO AUDIO SUPER 6 Скачать руководство пользователя

Страница: 8 / 142

UDO Super 6 — Owner’s Manual

viii

UPDATING THE FIRMWARE

PERFORMANCE CONTROL

SECTION (KEYBOARD

MODEL)

ADDITIONAL CONTROLS &

PARAMETERS (DESKTOP

MODEL)

USING THE MODULATION

PATCH, SEQUENCE &

WAVEFORM MANAGEMENT

HOW-TO GUIDE

MIDI SPECIFICATIONS

GLOSSARY

SUPPORT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

THE FOLLOWING SAFETY REQUIREMENTS MUST BE ADHERED TO

FOR PREVENTION OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Read all the instructions before using the musical instrument.

2. Do not disassemble or modify the musical instrument.

3. Never attempt to repair this device or replace parts. If repair or part replacement should

become necessary, you must contact your dealer. There are no user-serviceable parts

inside the musical instrument.

4. Never place the musical instrument in an unstable location. A musical instrument set may

fall, causing serious personal injury. Many injuries, particularly to children, can be avoided

by taking simple precautions such as:

•

Only using cabinets or stands that can safely support the musical instrument and

have an adequate load rating

•

Ensuring that the musical instrument is level and stable before use

•

Ensuring the musical instrument is not overhanging the edge of supporting furniture,

which could cause the musical instrument to topple

•

Not placing the musical instrument on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the musical instrument to

a suitable support

•

Not placing the musical instrument on cloth or other materials that may be located

between the musical instrument and supporting furniture or stand

•

Educating children about the dangers of climbing on furniture to reach the

musical instrument

5. Do not use or store the musical instrument in the following types of locations:

•

Locations exposed to rain

•

Locations of excessive dust

•

Locations subject to heavy vibration

•

Locations of extremely high temperature (such as in direct sunlight, near heating

equipment, or on a device that generates heat, or near naked flames or candles)

• Near moisture (such as in a bathroom, near a sink, or on a wet floor) or in locations

of high humidity

6. Do not stand on the musical instrument, or place heavy objects on it.

7. Do not drop the musical instrument.

8. The musical instrument should only be powered from an electrical outlet which provides a

voltage within the ratings of the instrument and provides an earth connection. Connection

to any supply voltage outside the rated range, or a supply without an earth connection,

can cause permanent damage and serious personal injury.

9. Only use the power cord included with the device. Do not attempt to modify or

disassemble the power cord. If replacing the fuse in the power cord, always replace it with

a fuse of the same type.

10. Do not place heavy or sharp objects on the power cord, as this could damage the power

cord and render it unsafe. If damage to the power cord is suspected, disconnect it from

the electrical outlet if safe to do so, do not use the power cord and contact your dealer.

11. Do not place any containers which contain liquids on or near the musical instrument.

12. Do not allow foreign objects or liquids to enter the musical instrument, as this can cause

permanent damage and may result in serious personal injury and possible ignition of

the liquid if flammable. If damage from foreign objects or liquids entering the musical

instrument is suspected, do not use the musical instrument, disconnect from the electrical

outlet and contact your dealer.

Содержание SUPER 6















































































































































Результаты поиска

Содержание SUPER 6

Отзывы:

Похожие инструкции для SUPER 6

Бренды по названию

Популярные бренды

UDO AUDIO SUPER 6, Руководство пользователя

Результаты поиска

Содержание SUPER 6

Отзывы:

Похожие инструкции для SUPER 6

Бренды по названию

Популярные бренды