UBI EasyCoder 501 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 106

background image

21

UBI EasyCoder 501 – Technical Manual

• Flowcontrol, cont'd:

RTS/CTS

This is a protocol where the communication is controlled by currents through
separate lines in the cable being set either to high or low. By default, this option is
disabled.

RTS high indicates that the transmitting unit is able to receive characters. RTS low
indicates that the receive buffer is filled to 75% (see XON/XOFF).

CTS high indicates that the unit transmitting the CTS signal is ready to receive data.
CTS low indicates that the receive buffer is full (see XON/XOFF). In some computer
programs, e.g.

MS Windows Terminal, RTS/CTS is designated “Hardware”.

In case of "uart2:" on the RS 422/485 Interface Board, the RTS/CTS option is replaced
by “Prot Addr: Enable/Disable”. The combination of “Prot Addr: Enable/Disable“
and “XON/XOFF; Data to Host: Enable/Disable” decides RS 422 or RS 485
communication. When using the option ”Prot addr: Enable”, the verbosity must be
turned off by means of a VERBOFF statement. See

UBI Fingerprint Programmer's

Guide for further information.

DTR

DTR (“Data Terminal Ready”) is a signal, which is not controlled in the setup mode,
but by straps on the CPU board or interface board. DTR high indicates that the
transmitting unit is turned on.

ENQ/ACK

In this protocol, the communication is controlled by the special characters ENQ
(ASCII 05 dec.) and ACK (ASCII 06 dec.) being transmitted on the same line as the
data. The sending unit transmits ENQ at regular intervals. If the response ACK is not
received the transmission is held up awaiting an ACK character from the receiving
unit. By default, this option is disabled.

XON/XOFF

In this protocol, the communication is controlled by the special characters XON
(ASCII 17 dec.) and XOFF (ASCII 19 dec.) being transmitted on the same line as the
data. XON/XOFF can be enabled/disabled separately for data received from the
host by the printer (printer sends XON/XOFF), and for data transmitted to the host
from the printer (host sends XON/XOFF).

XOFF is sent from the printer when its receive buffer is filled by 75%, and the
transmission from the host is held up awaiting an XON character. When enough
data have been processed that the receive buffer is filled only to 50%, the printer
sends an XON character and the host resumes transmitting data. The same
principles apply to XON/XOFF sent by the host, even if the percentage may differ.

By default, XON/XOFF is enabled for data both ways.

• New Line:

This setup parameter allows you select the character(s) transmitted
from the printer to specify the switching to a new line. There are
three options:

CR/LF

ASCII 13 dec. + ASCII 10 dec.

LF

ASCII 10 dec.

CR

ASCII 13 dec.

SETUP PARAMETERS, cont'd.

Serial Communication,
cont'd.

«
...
19
20
21
22
23
...
»

Содержание EasyCoder 501











































































































Отзывы:

Нет отзывов

Похожие инструкции для EasyCoder 501

Бренд: Tally Страницы: 53

T2265 SprintPro

Бренд: Tally Страницы: 30

Бренд: Tally Страницы: 108

Бренд: TallyGenicom Страницы: 2

Бренд: TallyGenicom Страницы: 2

Бренд: DNP Страницы: 66

Бренд: ABLE Systems Страницы: 12

Бренд: Oki Страницы: 16

IMAGE M4100 Series

Бренд: G&G Страницы: 147

DocuCentre-VI C2264

Бренд: Fuji Xerox Страницы: 129

Бренд: TierTime Страницы: 35

Бренд: UVP Страницы: 22

Бренд: LevelOne Страницы: 88

Бренд: IBM Страницы: 2

Бренд: InfoSight Страницы: 35

imagePROGRAF iPF8300

Бренд: Canon Страницы: 1150

Бренд: Samsung Страницы: 2

SCX-4623 Series

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды