UBI EasyCoder 501, Техническое руководство

Страница: 103 / 106

103
UBI EasyCoder 501 – Technical Manual
The Industrial Interface Board adds one serial communication port
and one connector with four IN and four OUT ports to the standard
serial communication port "uart1:".
The purpose of this board is primarily to provide an interface
between the printer and various types of external equipment, like
gates, transporters, wrappers etc. The input and output signals can
be read by means of the UBI Fingerprint function
PORTIN
and
output signals can be controlled by
PORTOUT ON/OFF
statements.
The Industrial Interface Board can either be bought separately as a
kit complete with installation instructions, or be factory installed.
With the Industrial Interface Board installed, the following means
of communication becomes available:
"uart1:" Fitted as standard on the printer's CPU pcb.
RS 232C Standard.
RS 422 or 20 mA CL Option. Additional circuits required.
"uart3:" Fitted on the Industrial interface pcb.
RS 232C
IN/OUT connector Fitted on the Industrial interface pcb.
4 input channels The software can read the status of four different
input signals.
4 output channels The software can set four different output signals to
either open or closed contact and also read their
status.
INTERFACES, cont'd.
Industrial Interface Board
230V
0
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
"uart3:"
IN/OUT
ports
"uart1:"