TV One C2-5000 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 116

background image

C2-5000 Series Universal Scaler Operation Manual

5

1.0 Disclaimer

This product is intended for professional and/or home use. This product is not
intended for use in a medical environment and does not have the required
certifications for such use. Similarly, use aboard any aircraft or spacecraft while
in flight or as an adjunct to any surface, airborne or marine navigation system or
any offshore marine activity, including control of any watercraft, or any use
similar to those specifically herein mentioned is prohibited. Use in the
aforementioned circumstances would require additional testing and certification.

You have not become the owner of any software - you have merely purchased
the right to use the software. You may make one copy of the software for your
own use. Other copies will be deemed a breach of copyright.

No warranty is made either expressed or implied including but not limited to any
implied warranties of merchantability or fitness for a particular purpose. In no
event shall the supplier or manufacturer of this product be liable for errors found
within, or be liable for any direct indirect or consequential damages or loss in
connection with the purchase or use of this hardware software or manual. The
sole and exclusive liability to the supplier and manufacturer regardless of the
form of action shall not exceed the replacement cost of the materials described
herein.

By using this equipment you have indicated that you have agreed to the terms
listed above. If you do not wish to agree or the above terms are contrary to your
conditions of purchase you may return the equipment, unused, to your supplier.
All trademarks and copyrights are acknowledged. E&OE.

1.1

Regulatory Agency Acceptance

European ‘CE’ Mark Statement

Emissions: BS EN 50081-1 (Generic Immunity Standard for Residential,
Commercial and Light Industrial)
Immunity: BS EN 0082-1 (Generic Immunity Standard for Residential,
Commercial and Light Industrial)
Low Voltage Directive: BS EN 60950-1:2002 (Information Technology
Equipment Safety)

FCC Statement

Class A Device: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not

«
...
3
4
5
6
7
...
»

Содержание C2-5000 Series





















































































































Отзывы:

Нет отзывов

Похожие инструкции для C2-5000 Series

Бренд: ABB Страницы: 62

Бренд: Sabaj Страницы: 18

Бренд: EAST COAST Страницы: 10

Бренд: APsystems Страницы: 22

AZZUPRO 5-20-ZSS

Бренд: ZCS Страницы: 44

BLUESTREAM DA44AU

Бренд: Dante Страницы: 12

Бренд: ICP DAS USA Страницы: 7

Бренд: Sonifex Страницы: 8

Бренд: M-system Страницы: 3

Бренд: DAISHIN Страницы: 28

Бренд: argon audio Страницы: 6

SinePower MSI212

Бренд: Waeco Страницы: 220

Бренд: TBM Страницы: 6

AZZYRRO 3-6-ZSS-HP

Бренд: ZCS Страницы: 65

Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology 8R

Бренд: M-Audio Страницы: 25

Бренд: CyberPower Страницы: 1

Бренд: Tascam Страницы: 28

Бренд: Tripp Lite Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды