Turner Designs TD-700, Руководство по эксплуатации, Страница: 48 / 55

TD-700 Laboratory Fluorometer Operating Manual
Page 47
APPENDIX 9
Maintenance, Warranty, & Service
A. Maintenance
If possible, do not spill liquids into the sample chamber. However, there is
a drain plug on the bottom of the instrument underneath the cuvette
adaptor. If there is a spill:
1. Unplug the instrument.
2. Remove the test tube or cuvette, the sample adaptor, and Filter
Cylinder from the instrument. Completely dry all of these items and the
optical filters.
3. Wipe up any moisture inside the sample chamber.
4. Plug in the unit and turn on the power. Allow it to run for a few hours
until completely dry inside.
Periodically wipe off the outside of the instrument with a damp cloth. Do
not use solvents or abrasive cleaners to clean the TD-700.
B. Warranty
Turner Designs warrants the TD-700 Fluorometer and accessories to be
free from defects in materials and workmanship under normal use and
service for a period of one year from the time of initial purchase, with the
following restrictions:
1. The instrument and accessories must be installed, powered, and
operated in compliance with the directions in this TD-700 Laboratory
Fluorometer Operating Manual and directions accompanying the
accessories.
2. Damage incurred in shipping is not covered.
3. Damage resulting from measurement of samples found to be incom-
patible with the materials used in the sample system is not covered.
4. Damage resulting from contact with corrosive materials or atmosphere
is not covered.
5. Damage from sea water and other moderately corrosive materials that
are not promptly removed from the instrument is not covered.
6. Damage caused by modification of the instrument by the customer is
not covered.
7. Failure of limited life parts, such as lamps, is not covered.