General Information
100
Handlebar Adjustment
Warning
It is recommended to have handlebar
adjustments carried out by a trained
technician of an authorized Triumph
dealer.
Handlebar adjustments carried out by
a technician who is not of an
authorized Triumph dealer may affect
the handling, stability or other aspects
of the motorcycle's operation which
may result in loss of motorcycle control
and an accident.
Warning
Before starting work, make sure that
the motorcycle is stabilized and
adequately supported.
This will help prevent personal injury
and/or damage to the motorcycle.
Note:
• This procedure assumes the
handlebars are in the standard
position, as delivered from the
factory. If the handlebars have
already been adjusted as described
below, the fastener positions will be
reversed.
The handlebars are adjustable for reach
by approximately 0.79 in (20 mm).
2
1
1.
0.39 in (10 mm) fasteners
2.
0.31 in (8 mm) fasteners
To adjust the handlebars:
• Loosen and remove the handlebar
rear (0.31 in (8 mm) threaded) clamp
fasteners, and then the front
(0.39 in (10 mm) threaded) clamp
and riser fasteners.
• Lift the handlebars out of the
handlebar risers and support with
the aid of an assistant.
• Rotate both risers through 180°
and align the fastener holes.
• Reposition the handlebars to the
risers.
• Reinstall the upper clamps, and
secure with the two 0.39 in (10 mm)
threaded fasteners in the rear
fastener positions. Do not fully
tighten the fasteners at this stage.
