Instruments
71
To Disable the ABS
To access the ABS Disable function:
• With the motorcycle stationary and
in neutral, turn the ignition to the
ON position.
• Press and release the SET button
on the left hand switch housing
until SEtUP is shown in the display
screen.
• Press and release the SCROLL
button until AbS is shown.
• Press the SET button and On or
OFF will be displayed.
• Press and release the SCROLL
button until OFF is shown in the
display screen.
• Pressing the SET button will disable
the ABS system; OFF will be
displayed for two seconds, and the
ABS
warning
light
will
be
illuminated.
• Press the HOME button and trip 1
will be shown in the display screen.
Note:
• With the ABS disabled, the traction
control will still function (unless the
traction control is also disabled).
To Enable the ABS
To enable the ABS system again:
• Repeat the ABS disable procedure
and select on.
• Press the HOME button and trip 1
will be shown in the display screen.
• An alternative way to enable the
ABS is to turn the ignition off and
on.
Clock Adjustment – t-SEt
1
1.
Time set
To reset the clock:
• With the motorcycle stationary and
in neutral turn the ignition to the
ON position.
• Press and release the SET button
on the left hand switch housing
until SEtUP is shown in the display
screen.
• Press and release the SCROLL
button until t-SEt is shown.
• Press the SET button again and
either 24 Hr or 12 Hr clock will be
shown.
• Press the SCROLL button to select
the required clock display and then
press the SET button. The hour
display will start to flash and the
word Hour is shown in the display
screen.
