Triumph Tiger XCA страница 136 Скачать руководство пользователя

Страница: 136 / 200

Maintenance

136

To maintain the motorcycle in a safe

and reliable condition, the maintenance

and adjustments outlined in this section

must be carried out as specified in the

schedule of daily checks, and also in line

with the scheduled maintenance chart.

The information that follows describes

the procedures to follow when carrying

out the daily checks and some simple

maintenance and adjustment items.
Scheduled maintenance may be carried

out by your authorized Triumph dealer

in three ways; annual maintenance,

mileage based maintenance or a

combination of both, depending on the

mileage the motorcycle travels each

year.
1.

Motorcycles traveling less than

6,000 miles (10,000 km) per year

must be maintained annually. In

addition to this, mileage based

items require maintenance at their

specified

intervals,

the

motorcycle reaches this mileage.

2. Motorcycles traveling approximately

6,000 miles (10,000 km) per year

must have the annual maintenance

and the specified mileage based

items carried out together.

3. Motorcycles traveling more than

6,000 miles (10,000 km) per year

must have the mileage based items

maintained as the motorcycle

reaches the specified mileage. In

addition to this, annual based items

will require maintenance at their

specified annual intervals.

In all cases maintenance must be

carried out at or before the specified

maintenance intervals shown. Consult

an authorized Triumph dealer for advice

on which maintenance schedule is most

suitable for your motorcycle.
Triumph Motorcycles cannot accept any

responsibility for damage or injury

resulting from incorrect maintenance or

improper adjustment.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды