Triumph Tiger XCA страница 41 Скачать руководство пользователя

Страница: 41 / 200

Instruments

Front Tire Pressure Display

This shows the current front tire

pressure.

Rear Tire Pressure Display

This shows the current rear tire

pressure.

Odometer

The odometer shows the total distance

that the motorcycle has traveled.

9060 12/2018

0940

ODO

date

Odometer Information Tray

Service Interval Announcement

The Service Interval Announcement

information tray shows the service

symbol, the distance/days remaining

before the next service and the current

odometer reading.

9060 12/2018

0940

ODO

date

Service Interval Announcement

Information Tray

For more information on service interval

announcements, see page

33.

Screen Contrast

The Screen Contrast information tray

item allows the display screen contrast

to be adjusted.

HIGH CONTRAST

AUTO CONTRAST

Screen Contrast Information Tray

There are two options available:
• HIGH CONTRAST - This option locks

the display screen to the white

background version of each display

screen style for maximum visibility.

• AUTO CONTRAST - This option uses

the instrument light sensor to

adjust the contrast to the most

suitable setting. In bright sunlight,

low brightness settings will be

overridden to make sure that the

instruments can be viewed at all

times.

To select an option:
• Push the joystick down/up to select

either the HIGH CONTRAST or AUTO

CONTRAST option and press the

joystick center to confirm.

If the rider defined brightness setting is

suitable this will be used, see page

51.

Note:

• Do not cover the light sensor on the

display screen as this will stop the

screen contrast from working

correctly.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды