General Information
96
When the front or rear tire pressure
display has been selected, —— PSI or bAr
will be shown in the LCD instrument
display screen until the motorcycle is
traveling at a speed greater than
12 mph (20 km/h) and the tire pressure
signal is received.
Once the tire pressure signal has been
received, the pressure of the selected
tire will be displayed.
TPMS Symbol
With the ignition switch turned to the
ON position, if the TPMS symbol flashes
for 10 seconds and then remains on,
there is a fault with the TPMS system.
Contact your authorized Triumph dealer
to have the fault rectified.
TPMS Sensor Batteries
When the battery voltage in a pressure
sensor is low, lo bAtt will be displayed
for eight seconds and the TPMS symbol
will indicate which wheel sensor has the
low battery voltage. If the batteries are
completely flat, only dashes will be
shown in the display screen, the red
TPMS warning light will be on and the
TPMS symbol will flash continuously.
Contact your authorized Triumph dealer
to have the sensor replaced and the
new serial number recorded in the
spaces provided in page
95.
TPMS Tire Pressures
Warning
The tire pressure monitoring system is
not to be used as a tire pressure gage
when adjusting the tire pressures. For
correct tire pressures, always check
the tire pressures when the tires are
cold and using an accurate tire
pressure gage.
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.
The tire pressures shown on your
instrument panel indicate the actual tire
pressure at the time of selecting the
display. This may differ from the
inflation pressure set when the tires are
cold because tires become warmer
during riding, causing the air in the tire
to expand and the inflation pressure to
increase. The cold inflation pressures
specified by Triumph take account of
this.
Replacement Tires
When replacing tires, always have an
authorized Triumph dealer mount your
tires and make sure that they are aware
that tire pressure sensors are mounted
to the wheels.
