Triumph Tiger XCA Скачать руководство пользователя страница 182

Страница: 182 / 200

Maintenance

182

To replace a bulb:
• Remove the rider's seat.
• Disconnect the battery, negative

(black) lead first.

• Remove the bulb cover from the

bulb to be replaced by rotating it

counterclockwise.

• Disconnect the multiplug from the

bulb.

• Detach the bulb retainer from the

hook on the headlight assembly

and rotate it away from the bulb as

shown.

• Remove the bulb from the bulb

retainer.

• Installation is the reverse of the

removal procedure.

Position Light Bulb Replacement

The position light is mounted to the

center of the headlight.

chgn

Fasteners

Headlight surround

Position light bulb

To replace the bulb:
  •  Remove the four fasteners.
  •  Remove the headlight surround.
  •  Detach  the  rubber  retainer  from

the headlight and gently pull out

the bulb.

• Installation is the reverse of the

removal procedure.

Daytime Running Light (DRL)

(if equipped)

The Daytime Running Light (DRL) is

situated within the headlight assembly

and is a sealed, maintenance-free LED

unit. The headlight unit must be

replaced in the event of the failure of

the DRL.

Fog Lights (if equipped)

The fog light units are sealed,

maintenance-free LED units.

Tail/Brake Light / License Plate

Light

The tail/brake light unit is a sealed,

maintenance-free LED unit. The license

plate light is integral to the tail/brake

light unit.

Turn Signal Lights

The motorcycle is equipped with either

LED or bulb turn signal lights.

LED Turn Signal Lights

The turn signal light units are sealed,

maintenance-free LED units.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Бренды по названию

Популярные бренды