Triumph Tiger XCA Скачать руководство пользователя

Страница: 9 / 200

Safety First

Warning

A helmet is one of the most important

pieces of riding gear as it offers

protection against head injuries. You

and your passenger’s helmet should

be carefully chosen and should fit you

or your passenger’s head comfortably

and securely. A brightly colored helmet

will increase a rider’s (or passenger’s)

visibility to other operators of road

vehicles.
An open face helmet offers some

protection in an accident though a full

face helmet will offer more.
Always wear a visor or approved

goggles to help vision and to protect

your eyes.

cbma

When choosing a helmet, always look for

a DOT (Department of Transport) sticker

indicating that the helmet has DOT

approval. Do not buy a helmet without

DOT approval.

Riding

Warning

Never ride the motorcycle when

fatigued or under the influence of

alcohol or other drugs.
Riding when under the influence of

alcohol or other drugs is illegal.
Riding when fatigued or under the

influence of alcohol or other drugs

reduces the rider's ability to maintain

control of the motorcycle and may lead

to loss of control and an accident.

Warning

All riders must be licensed to operate

the motorcycle. Operation of the

motorcycle without a license is illegal

and could lead to prosecution.
Operation of the motorcycle without

formal training in the correct riding

techniques that are necessary to

become licensed is dangerous and may

lead to loss of motorcycle control and

an accident.

Warning

Always ride defensively and wear the

protective

equipment

mentioned

elsewhere in this foreword. Remember,

in an accident, a motorcycle does not

give the same impact protection as a

car.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды