General Information
109
A helmet can be secured to the
motorcycle using the helmet hook
located on the left hand side of the
motorcycle, beneath the passenger seat.
1
cgif
1.
Helmet hook
To attach a helmet to the motorcycle:
• Remove the passenger seat.
• Loop the helmet chin strap over the
hook.
• Make sure that the flat area above
the hook is not obstructed by the
helmet strap, as this will prevent
the passenger seat engaging
correctly.
1
cgif
1.
Helmet hook flat area
To secure the helmet, re-install the seat
and lock into position.
Electrical Accessory Socket
1
1.
Ignition switch socket (all models)
All models have a socket located next to
the ignition switch.
The sockets will provide a 12 Volt
electrical supply.
The electrical accessory socket circuit is
protected by the specified fuse shown
in the fuse chart on page
176.
To protect the battery from excessive
discharge while using mounted electrical
accessories, the combined total current
which may be drawn through the
electrical accessory sockets is five
Amps.
A plug, suitable for use with the
electrical accessory sockets, is available
from your authorized Triumph dealer.
