Instruments
66
When the ignition is switched on and
the distance to the next service is
500 miles (800 km) or less, the display
will briefly show the distance remaining
before the next service. If the service is
overdue, the distance will be displayed
as a negative number.
When the service has been carried out
by your authorized Triumph dealer, the
system will be reset.
When the remaining distance is 0 miles,
the service symbol will remain on until
the service has been carried out and
the system has been reset by your
authorized Triumph dealer. If the service
is overdue, the distance will be displayed
as a negative number.
Trip Computer
2
1
3
1.
SCROLL button, up
2.
SCROLL button, down
3.
SET button
To access the trip computer information:
• Press and release the SET button
on the left hand switch housing
until the desired display is shown.
• The display will cycle through in the
following order:
– Trip Meter 1
– Trip Meter 2
– Information
– Setup.
Trip Meters
2
3
1
1.
Trip meter display
2.
Trip meter 1 display
3.
Trip meter 2 display
To access the trip meters:
• Press and release the SET button
on the left hand switch housing
until the required trip meter is
shown.
• Press and release the SCROLL
button on the left hand switch
housing.
• The display will show the trip
distance. This is the total trip
distance traveled since the trip
meter was last reset to zero.
