Instruments
67
Trip Meter Reset
To reset either of the trip meters:
• Select and display the trip meter to
be zeroed.
• Press and hold the SET button for
two seconds. After two seconds, all
items within the selected trip meter
will reset to zero.
Information Menu
To access the information menu:
• Turn the ignition to the ON position.
• Press and release the SET button
on the left hand switch housing
until InFo appears in the display
screen.
Note:
• InFo will appear in the display
screen for 0.5 seconds to indicate
that the information menu has been
selected. The display screen will
then change to display one of the
items listed below.
• Press and release the SCROLL
button on the left hand switch
housing. The display will scroll
through the information menu in
the following order when pressing
down on the SCROLL button (it will
scroll through in the reverse order
when pressing up on the SCROLL
button):
– Range to empty
– Ambient air temperature
– Odometer
– Front tire pressure (if TPMS is
equipped and activated)
– Rear tire pressure (if TPMS is
equipped and activated)
– Instantaneous
fuel
consumption.
Each display provides the following
information:
Range to Empty
This is an indication of the probable
distance that can be traveled on the
remaining fuel in the tank.
Range to Empty
Ambient Air Temperature
The current ambient air temperature is
displayed in °C or °F.
To change the temperature from °C or
°F, see page
73.
Ambient Air Temperature
