Triumph Tiger XCA Скачать руководство пользователя

Страница: 114 / 200

General Information

114

• Press downwards on the quick

release mechanism for the pannier

lid hinge.

• Slide the lid down and to the rear

to release the pannier lid hinge. The

lid can now be removed from the

pannier.

cise

Pannier lid hinge quick release

mechanism

To install the pannier lid:
• Press downwards on the quick

release mechanism and relocate

the pannier lid hinge.

• Release

the

quick

release

mechanism, making sure that the

hinge is correctly engaged.

• Attach the retaining straps to the

pannier lid.

To close and lock the pannier:
• Close the lid and secure with the

pannier lid latch.

• Turn the key to the LOCK position

and remove it.

cisb

Lock barrel - lock position

Pannier lid latch

Warning

The maximum safe load for each

pannier is 11 lb (5 kg).
Never exceed this loading limit as this

may cause the motorcycle to become

unstable leading to loss of motorcycle

control and an accident.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды