Triumph Tiger XCA Скачать руководство пользователя

Страница: 194 / 200

Specifications

194

Approved Tires
A list of approved tires specific to these models is available from your authorized

Triumph dealer, or on the Internet at www.triumph.co.uk.

Approved Dual Purpose Tires
A list of approved dual purpose tires specific to these models is available from

your authorized Triumph dealer, or on the Internet at www.triumph.co.uk.

Warning

Use the recommended tires ONLY in the combinations given. Do not mix tires from

different manufacturers or mix different specification tires from the same

manufacturers as this may result in loss of motorcycle control and an accident.

Tiger 800 XR - All Models

Tiger 800 XC - All Models

Tire Sizes:
Front Size

100/90 - 19 M/C 57V

90/90 - 21 M/C 54V

Rear Size

150/70 R 17 M/C 69V

Tire Pressures (Cold):
Front

36 lb/in² (2.5 bar)

Rear

42 lb/in² (2.9 bar)

Warning

Tire pressures which have been reduced for off-road riding will impair on-road

stability. Always make sure that the tire pressures are set as described in the tire

pressure charts for on-road use.
Operation of the motorcycle with incorrect tire pressures may cause loss of

motorcycle control leading to an accident.

Warning

The use of dual purpose tires will result in reduced motorcycle stability. Always

operate a motorcycle equipped with dual purpose tires at reduced speeds. The

permissible maximum speed must be indicated by a sticker, positioned so that it is

clearly visible to the rider. Operation of the motorcycle above the permissible

maximum speed may result in loss of motorcycle control and an accident.

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды