Triumph Tiger XCA Скачать руководство пользователя

Страница: 47 / 200

Instruments

Bike Set Up - ABS

It is possible to temporarily disable the

ABS. The ABS cannot be permanently

disabled, it will be automatically enabled

when the ignition is turned off and then

on again, or if the default riding mode is

activated by a long press of the MODE

button.

EXIT

BIKE SETUP

ABS

DISABLED

ENABLED

SERVICE

ABS

INDICATORS

TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD

To select the required option:
• From the Bike Set Up menu, push

the joystick down to select ABS and

press the joystick center to confirm.

• Push the joystick down/up to scroll

between ENABLED and DISABLED.

• Press the joystick center to confirm

the required selection.

• The display will then return to the

Bike Set Up menu.

Bike Set Up - Traction Control (TC)

It is possible to temporarily disable the

traction control system. The traction

control cannot be permanently disabled,

it will be automatically enabled when the

ignition is turned off and then on again,

or if the default riding mode is activated

by a long press of the MODE button.

EXIT

BIKE SETUP

DISABLED

ENABLED

SERVICE

ABS

INDICATORS

TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD

To select the required option:
• From the Bike Set Up menu, push

the joystick down to select TC and

press the joystick center to confirm.

• Push the joystick down/up to scroll

between ENABLED and DISABLED.

• Press the joystick center to select

the required option.

The display will then return to the BIKE

SET UP display.

Bike Set Up - Service

The service interval is set to a distance

and/or time period.

EXIT

BIKE SETUP

INDICATORS
ABS

SERVICE

5450 mi
01-01-2017 (335 DAYS)

TC
SERVICE

RESET

Содержание Tiger XCA









































































































































































































Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды

Triumph Tiger XCA, Руководство пользователя

Результаты поиска

Содержание Tiger XCA

Отзывы:

Похожие инструкции для Tiger XCA

Бренды по названию

Популярные бренды