General Information
105
To reinstall the seat:
• Reconnect the heated seat’s
electrical connector (if equipped).
• Engage the seat's front rail into the
bracket at the rear of the fuel tank
and lower the rear rail in to the
rear brackets.
• Push down firmly on the rear of the
seat.
• Reinstall the passenger seat (see
page
103).
Rider's Seat Height Adjustment
The rider's seat is adjustable for height
by approximately 0.98 in (25 mm).
2
4
5
3
1
1.
Rider's seat
2.
Front seat height adjuster
3.
Passenger seat height adjuster
4.
Low seat height position (rear shown)
5.
High seat height position (rear shown)
To adjust the rider's seat:
• Remove the rider's seat (see
page
104).
• Reposition
both
seat
height
adjusters to the higher or lower
position as required.
• Make sure that both adjuster rails
are fully engaged in their brackets
on the seat.
• Reinstall the rider's seat (see
page
104).
Warning
Always adjust both seat height
adjusters. Adjusting only one height
adjuster
may
prevent
correct
installation of the seat.
Riding the motorcycle with an
incorrectly mounted seat may cause
loss of motorcycle control and an
accident.
Warning
After adjusting the seat, operate the
motorcycle in an area free from traffic
to gain familiarity with the new seat
position.
Riding the motorcycle with the seat in
an unfamiliar position may cause loss
of motorcycle control and an accident.
