Toyota Celica 2005, Руководство по ремонту

Страница: 1480 / 2497

A01159
Plastigage
A01163
A01160
EM − 94
− ENGINE MECHANICAL CYLINDER BLOCK
2005 CELICA (RM1131U)
(f) Lay a strip of Plastigage the crank pin.
(g) Install the connecting rod cap with the 2 bolts (See page
EM
− 108).
Torque:
1st:
1ZZ
− FE: 20 N·m (204 kgf·cm, 15 ft·lbf)
2ZZ − GE: 30 N·m (306 kgf·cm, 22 ft·lbf)
2nd: Turn extra 90 °
NOTICE:
Do not turn the crankshaft.
(h) Remove the 2 bolts, connecting rod cap and lower bear-
ing. (See procedure (b) and (c) above)
(i) Measure the Plastigage at its widest point.
Standard oil clearance:
1ZZ
− FE:
0.028 − 0.060 mm (0.0011 − 0.0024 in.)
2ZZ − GE:
0.028 − 0.052 mm (0.0011 − 0.0020 in.)
Maximum oil clearance;
0.08 mm (0.0031 in.)
If the oil clearance is greater than maximum, replace the bear-
ings. If necessary, grind or replace the crankshaft.
1479